Suit most residential car garage doors, sectional or tilting type with proper spring balance.
|Door height: 1400 mm to 3000 mm||Door width: up to 6500 mm|
|Typical operating circle: 4-6 times a day||Recommended door operating force: < 15 Kilogram|
Head Room Space: Min. 80 mm above the highest point of the door is recommended Horizontal Back Clearance: Door entry height plus 750 mm.
|Permanent Lubricated DC motor||Lower vibration, quieter than the AC motor drive.|
Reduced chance of wearing out of gear out means fewer parts to wear out. No overheat due to continuous operation.
|Soft Start and Soft Stop (SS and SS)||Quieter and smoother.|
Make opener and door life span last longer.
|LED Bright Lighting System||Green energy (saving electrical power).|
Do not need to replace light bulb any more.
|Industrial based nylon plastic base||Absorbs vibration & noise, safer for use.|
|Auto Reverse Protection System||Reduction in the risks of personal injury and property damage in case of an accident.|
|Rolling Code Technology (ROC)||Make your door more secure by eliminating possible code intercepting and duplication.|
|Pre-assembled aluminium chain rail||Lower noise, solid and neat, non rusty & easier to install.|
|Pressed Metal Sprocket and Spine Connection||Long lasting, torque force is evenly distributed resulting in lower vibration and noise.|
|Clear plastic cover on the adjustment section||More protection so safer while better appearance. |
|Power Input: 240V / 110V, 50 - 60Hz||Lifting Force: 800 Newton||Radio Frequency: 433Mhz|
|Motor: 24V Direct Current||Transmitter Storage: up to 16 codes||Adjustable Force: 5Kg per unit|
|Receiver: Low brand, Rolling Code||Chain Rail: Pre-assembled, Fully adjustable|| |
Content: Power Head, Two Transmitters, Parts Kit and Owner's Manual, Chain Rail Kit (packed separately).
Size and Weight: Power Head Kit: 200H x 255W x 510L (MM), 7.5 KG;
Chain Rail Kit: 45H x 75W x (1800, 3000, 3300,3650, 3800) L (MM), 12, 20, 23, 24 KG.
Back to Top